# -*- coding: utf-8 -*-
#
# Definitions from ../include/ntp_control.h begin
#
# This file was generated by pythonize-header;
# DO NOT HAND-HACK IT!
#
# ntp_control.h - definitions related to NTP mode 6 control messages
#
# mode 6 messages are defined in:
# https://datatracker.ietf.org/doc/draft-ietf-ntp-mode-6-cmds/
#
#
#ifndef GUARD_NTP_CONTROL_H
#define GUARD_NTP_CONTROL_H


# The attribute after this structure is a gcc/clang extension that forces
# the beginning of a structure instance to be 32-bit aligned.  Without this
# attempting to compile on a 32-bit host may throw warnings or errors when
# a pointer to this structure is passed to authdecrypt/authencrypt, both of
# which expect to be able to treat the structure as an array of uint32_t
# elements.  Ideally, we'd get rid of that nasty type punning. */

#
# Length of the control header, in octets
#
# CTL_HEADER_LEN		= (offsetof(struct ntp_control, data))
CTL_MAX_DATA_LEN	= 468

#
# Decoding for the r_m_e_op field
#
CTL_RESPONSE	= 0x80
CTL_ERROR	= 0x40
CTL_MORE	= 0x20
CTL_OP_MASK	= 0x1f

def CTL_ISRESPONSE(r_m_e_op): return ((CTL_RESPONSE	& (r_m_e_op)) != 0)
def CTL_ISMORE(r_m_e_op): return	 ((CTL_MORE	& (r_m_e_op)) != 0)
def CTL_ISERROR(r_m_e_op): return	 ((CTL_ERROR	& (r_m_e_op)) != 0)
def CTL_OP(r_m_e_op): return	 (CTL_OP_MASK	& (r_m_e_op))

#
# Opcodes
#
CTL_OP_UNSPEC		= 0	# unspeciffied 
CTL_OP_READSTAT		= 1	# read status 
CTL_OP_READVAR		= 2	# read variables 
CTL_OP_WRITEVAR		= 3	# write variables 
CTL_OP_READCLOCK	= 4	# read clock variables 
CTL_OP_WRITECLOCK	= 5	# write clock variables 
# #def	CTL_OP_SETTRAP		6	** set trap address (unused) 
# #def	CTL_OP_ASYNCMSG		7	** trap message (unused) 
CTL_OP_CONFIGURE	= 8	# runtime configuration 
# #def	CTL_OP_EXCONFIG		9	**  export config to file (unused) 
CTL_OP_READ_MRU		= 10	# retrieve MRU (mrulist) 
CTL_OP_READ_ORDLIST_A	= 11	# ordered list req. auth. 
CTL_OP_REQ_NONCE	= 12	# request a client nonce 
# #def	CTL_OP_UNSETTRAP	31	** unset trap (unused) 

#
# {En,De}coding of the system status word
#
CTL_SST_TS_UNSPEC	= 0	# unspec 
CTL_SST_TS_ATOM		= 1	# pps 
CTL_SST_TS_LF		= 2	# lf radio 
CTL_SST_TS_HF		= 3	# hf radio 
CTL_SST_TS_UHF		= 4	# uhf radio 
CTL_SST_TS_LOCAL	= 5	# local 
CTL_SST_TS_NTP		= 6	# ntp 
CTL_SST_TS_UDPTIME	= 7	# other 
CTL_SST_TS_WRSTWTCH	= 8	# wristwatch 
CTL_SST_TS_TELEPHONE	= 9	# telephone 

CTL_SYS_MAXEVENTS	= 15

def CTL_SYS_STATUS(li, source, nevnt, evnt): return \
		(((((li) & 0xffff) << 14)&0xc000) |			\
		(((source)<<8)&0x3f00) | \
		(((nevnt)<<4)&0x00f0) | \
		((evnt)&0x000f))

def CTL_SYS_LI(status): return	(((status)>>14) & 0x3)
def CTL_SYS_SOURCE(status): return	(((status)>>8) & 0x3f)
def CTL_SYS_NEVNT(status): return	(((status)>>4) & 0xf)
def CTL_SYS_EVENT(status): return	((status) & 0xf)

#
# {En,De}coding of the peer status word
#
CTL_PST_CONFIG		= 0x80
CTL_PST_AUTHENABLE	= 0x40
CTL_PST_AUTHENTIC	= 0x20
CTL_PST_REACH		= 0x10
CTL_PST_BCAST		= 0x08

CTL_PST_SEL_REJECT	= 0	#   reject 
CTL_PST_SEL_SANE	= 1	# x falsetick 
CTL_PST_SEL_CORRECT	= 2	# . excess 
CTL_PST_SEL_SELCAND	= 3	# - outlier 
CTL_PST_SEL_SYNCCAND	= 4	# + candidate 
CTL_PST_SEL_EXCESS	= 5	# # backup 
CTL_PST_SEL_SYSPEER	= 6	# * sys.peer 
CTL_PST_SEL_PPS		= 7	# o pps.peer 

CTL_PEER_MAXEVENTS	= 15

def CTL_PEER_STATUS(status, nevnt, evnt): return \
		((((status)<<8) & 0xff00) | \
		(((nevnt)<<4) & 0x00f0) | \
		((evnt) & 0x000f))

def CTL_PEER_STATVAL(status): return(((status)>>8) & 0xff)
def CTL_PEER_NEVNT(status): return	(((status)>>4) & 0xf)
def CTL_PEER_EVENT(status): return	((status) & 0xf)

#
# {En,De}coding of the clock status word
#
CTL_CLK_OKAY		= 0
CTL_CLK_NOREPLY		= 1
CTL_CLK_BADFORMAT	= 2
CTL_CLK_FAULT		= 3
CTL_CLK_PROPAGATION	= 4
CTL_CLK_BADDATE		= 5
CTL_CLK_BADTIME		= 6

def CTL_CLK_STATUS(status, event): return \
		((((status)<<8) & 0xff00) | \
		((event) & 0x00ff))

#
# Error code responses returned when the E bit is set.
#
CERR_UNSPEC	= 0
CERR_PERMISSION	= 1
CERR_BADFMT	= 2
CERR_BADOP	= 3
CERR_BADASSOC	= 4
CERR_UNKNOWNVAR	= 5
CERR_BADVALUE	= 6
CERR_RESTRICT	= 7

CERR_NORESOURCE	= CERR_PERMISSION	# wish there was a different code 


#
# Types of things we may deal with
# shared between ntpq and library
#
TYPE_SYS	= 1
TYPE_PEER	= 2
TYPE_CLOCK	= 3

#
# IFSTATS_FIELDS is the number of fields ntpd supplies for each ifstats
# row.  Similarly RESLIST_FIELDS for reslist.
#
IFSTATS_FIELDS	= 12
RESLIST_FIELDS	= 4

#
# To prevent replay attacks, MRU list nonces age out. Time is in seconds.
#
# Don't change this value casually.  Lengthening it might extend an
# attack window for DDoS amplification.  Shortening it might make your
# server (or client) incompatible with older versions.
#
NONCE_TIMEOUT	= 16

#endif # GUARD_NTP_CONTROL_H